4 Common Rigging Equipment Mistakes That Course Teaches To Avoid

0
160
4 Common Rigging Equipment Mistakes That Course Teaches To Avoid

Handling heavy pieces of machinery is a challenging task when it comes to rigging operation. Every operator needs to understand the operating skill and knowledge to ensure that they do not fall into the trap of mishandling. The persons interested in rigging as their profession needs to undergo a fixed training course that teaches the proper operation. The courses are designed in a manner to ensure that the persons opting for the course learn about the safety and planning. Working with rigging is all about making the right decisions.

The following are some of the common mistakes associated with the heavy machinery used for rigging and how the courses are helpful in evading them-

[better-ads type=”banner” banner=”509″ campaign=”none” count=”2″ columns=”1″ orderby=”rand” order=”ASC” align=”center” show-caption=”1″][/better-ads]

Mistake #1

Improper Selection of the Hardware and SLINGS

Well, a workplace is not about experimenting. Many rigging operators try out the incorrect gear to handle the materials. This results in the project to complete long and adds to the costing.

Correction

Trying out such thing is a costly affair. Therefore, the operators need to follow the right ways to handle the materials. In the basic rigging course, the to-be operators are taught and trained about the use of the right gears to increase the cost-effectiveness.

[better-ads type=”banner” banner=”510″ campaign=”none” count=”2″ columns=”1″ orderby=”rand” order=”ASC” align=”center” show-caption=”1″][/better-ads]

Mistake #2

Improper Selection of the Cranes

In the field of rigging where every small job makes use of the crane, it is mandatory to know the working capacity of every powerlifting machines. At times, the operators select the wrong crane to lift an object resulting in the failures and injuries.

Correction

The rigging courses emphasize on knowing the right lifting capacity of the crane. During the course, the going-to-be operators are taught to stick to the manufacturer’s instruction and strictly adhere to the maximum load capacity. They are also trained to match the weight and the machine’s capacity before making the selection.

Mistake #3

Ignoring the Instruction Manual

Many operators think that practice would make them perfect and in the way, they ignore the manual.

Correction

The courses suggest to strictly adhering to the instruction manual as several elements need to be taken care during the operation. The courses instruct to follow the manual apart from imparting training to operate the rigging equipment.

Mistake #4

Neglecting the Care of the Equipment

[better-ads type=”banner” banner=”512″ campaign=”none” count=”2″ columns=”1″ orderby=”rand” order=”ASC” align=”center” show-caption=”1″][/better-ads]

With the regular use — to lift weight — the machines get wear and tear which are mostly neglected. The most prone part of the rigging apparatus is the sling that corrodes and degrades quickly.

Correction

Having thorough maintenance of the equipment is important. In the advanced rigging course, the future operators are taught the importance of maintenance. The course offers an exhaustive knowledge on how to take care of the slings. The slings are needed to be lubricated timely to ensure that no dirt or dust particle settles down. This take care helps in retaining the performance of the rigging apparatus.

Conclusion

A safe rigging is all about ascertaining the proper positioning of the load and the center of mass. The course is all about having a better understanding of the weight, height, angles, and maintaining the balance that would help in accomplishing a safer operation.

LEAVE A REPLY

Please enter your comment!
Please enter your name here