Worker Wearing Faulty Safety Harness, Putting His Life At Risk

3
550
The Worker Wearing Faulty Safety Harness, Putting His Life At Risk

Falls that occur while working at heights are still among the biggest causes of major injuries and fatalities. Some of the common cases include falls through fragile surfaces (such as roofs) and ladders. Thousands of workers suffer mild to major injuries from falls related to working at heights.

Unfortunately, loss of life has also become a common occurrence. If you are the type of person who works at height or know someone who does, the need to ensure safety is guaranteed. There are many ways through which safety can be assured while working at heights.

[better-ads type=”banner” banner=”509″ campaign=”none” count=”2″ columns=”1″ orderby=”rand” order=”ASC” align=”center” show-caption=”1″][/better-ads]

They range from proper planning and inspection of the job site to the wearing of appropriate and properly functioning personal protective equipment.

One of the most recommended types of PPE is the full body harness. Unfortunately, a lot of construction workers or people who work at heights don’t usually see the importance of wearing a full body harness. The importance of doing so only occurs to them after they have suffered a fall – and are lucky enough to live and narrate their story.

A safety harness is a crucial component of the personal fall arrest systems. It plays the important role of keeping users suspended upright in case of a fall. It also supports them as they await rescue.

The full body safety harness is highly recommended in fall restraint systems that prevent employees from reaching points where falls are probable.

The use of body belts as a safety harness is discouraged most of the time. This is mainly because the fall forces are usually concentrated on the abdomen. On the other hand, a full body harness distributes these forces throughout the body, and this has the advantage of minimising the chances of injuries by significant margins.

3 COMMENTS

  1. As far as I could see, the harness was incorrectly fitted. The leg straps weren’t tightened evenly and the “bum” strap was not positioned low enough to begin with.

  2. Why risk your life for some old Scaffolding poles.

    So many things wrong with that. The guy should have been removed from the job site and told never to come back

LEAVE A REPLY

Please enter your comment!
Please enter your name here