Test Your Knowledge Of Tool Safety

Which of the following tool categories accounts for most hand injuries?

Chainsaws, impact wrenches, and nail guns

Saws, drills, and nail guns

Hammers, hand grinders, and drills

Hand grinders, chainsaws and hammers

Correct! Wrong!

According to OSHA, who is ultimately responsible for the safe condition of tools and equipment?

The employer

The supervisor

The safety manager

The employee

Correct! Wrong!

Which of the following would be a suitable diameter for single-handle tools requiring a power grip?

1 inch

3/4 inch

1 3/4 inches

1/2 inch

Correct! Wrong!

What is often the cause of tool damage and personal injury?

Failing to understand the limitations of tools

Using too much force while using the tool

Using tools for something other than intended purposes

Failing to properly handle tools

Correct! Wrong!

Which of the following is the preferred power tool control device?

The lock-on control switch

The intermittent trigger control switch

The constant-pressure control switch

The positive on-off control switch

Correct! Wrong!

Which of the following statements is TRUE regarding double-insulated tools?

You can still get shocked from a double-insulated tool.

All double-insulated tools will prevent shock even if submerged.

Double-insulated tools reduce the chance of getting shocked by 100%.

Removing the third ground prong makes a tool double-insulated.

Correct! Wrong!

Pressure from a hard surface, point, or edge on any part of the body is:

Flexion and Extension

Contact Pressure

Power Grip

Neutral Position

Correct! Wrong!

Machine guards on power tools help protect the employee from each of the following hazards, EXCEPT _____.

in-running nip point

transverse motion

point of operation

rotating parts

Correct! Wrong!

Which of the following is NOT a safe rule when working with tools?

Do not strike a hardened steel surface with a steel hammer.

Do not pull on on wrenches: push them.

Do not use screw drivers to test electrical circuits.

Never use wrenches as hammers.

Correct! Wrong!

For double-handle tools used for precision tasks, select a tool with a grip span that is _ when fully closed and _ when fully open.

no less than 1 1/2 inches; no more than 3 1/2 inches

no less than 1 inch; no more than 3 inches

no less than 1 inch; no more than 2 3/4; inches

no less than 2 1/4 inches; no more than 4 inches

Correct! Wrong!

When are tools with straight handles better to use than those with bent handles?

When the force is applied diagonally

When the force is applied horizontally

When the force is applied tangentially

When the force is applied vertically

Correct! Wrong!

Each of the following is a condition that might result in hand and wrist illness, EXCEPT _____.

tools requiring a power grip

tasks requiring repetitive motion

vibrating tools

cold environments

Correct! Wrong!

Each of the following is a safe practice when operating power tools, EXCEPT _____.

always standing directly behind the equipment

keeping safety guards in place and working properly

not allowing wires or chords that could get caught in equipment

using both hands to hold and guide material being sawed

Correct! Wrong!

Most often, the damage to power extension cords is only to the _____.

insulation

ground wires

plugs

hot side of the circuit

Correct! Wrong!

A common violation OSHA compliance officers cite on construction worksites is _____.

missing ground prongs from plugs

extension cords are insufficient in length

extension cords are not of the correct color

more than two extension cords are connected in series

Correct! Wrong!

Test Your Knowledge Of Tool Safety

I Got 6% Marks In Tool Safety Knowledge Quiz | Very Poor

You score is very poor in tool safety knowledge quiz, you can do better, try again.

I Got 13% Marks In Tool Safety Knowledge Quiz | Very Poor

You score is very poor in tool safety knowledge quiz, you can do better, try again.

I Got 20% Marks In Tool Safety Knowledge Quiz | Poor

You score is poor in tool safety knowledge quiz, you can do better, try again.

I Got 26% Marks In Tool Safety Knowledge Quiz | Poor

You score is poor in tool safety knowledge quiz, you can do better, try again.

I Got 33% Marks In Tool Safety Knowledge Quiz | Poor

You score is poor in tool safety knowledge quiz, you can do better, try again.

I Got 40% Marks In Tool Safety Knowledge Quiz | Poor

You score is poor in tool safety knowledge quiz, you can do better, try again.

I Got 46% Marks In Tool Safety Knowledge Quiz | Fair

You score is fair in tool safety knowledge quiz, you can do better, try again.

I Got 53% Marks In Tool Safety Knowledge Quiz | Fair

You score is fair in tool safety knowledge quiz, you can do better, try again.

I Got 60% Marks In Tool Safety Knowledge Quiz | Good

You score is good in tool safety knowledge quiz, you can do better, try again.

I Got 66% Marks In Tool Safety Knowledge Quiz | Good

You score is good in tool safety knowledge quiz, you can do better, try again.

I Got 73% Marks In Tool Safety Knowledge Quiz | Very Good

You score is very good in tool safety knowledge quiz, you can do better, try again.

I Got 80% Marks In Tool Safety Knowledge Quiz | Very Good

You score is very good in tool safety knowledge quiz, you can do better, try again.

I Got 86% Marks In Tool Safety Knowledge Quiz | Very Good

You score is very good in tool safety knowledge quiz, you can do better, try again.

I Got 93% Marks In Tool Safety Knowledge Quiz | Excellent

You score is excellent in tool safety knowledge quiz, you can do better

I Got 100% Marks In Tool Safety Knowledge Quiz | Excellent

You score is excellent in tool safety knowledge quiz

Test Your Knowledge Of Tool Safety | MCQs Test

Which of the following tool categories accounts for most hand injuries?

According to OSHA, who is ultimately responsible for the safe condition of tools and equipment?

Which of the following would be a suitable diameter for single-handle tools requiring a power grip?

What is often the cause of tool damage and personal injury?

Which of the following is the preferred power tool control device?

Which of the following statements is TRUE regarding double-insulated tools?

Pressure from a hard surface, point, or edge on any part of the body is:

Machine guards on power tools help protect the employee from each of the following hazards, EXCEPT _____.

Which of the following is NOT a safe rule when working with tools?

For double-handle tools used for precision tasks, select a tool with a grip span that is _ when fully closed and _ when fully open.

When are tools with straight handles better to use than those with bent handles?

Each of the following is a condition that might result in hand and wrist illness, EXCEPT _____.

Each of the following is a safe practice when operating power tools, EXCEPT _____.

Most often, the damage to power extension cords is only to the _____.

A common violation OSHA compliance officers cite on construction worksites is _____.

About Waqar Ali

Leave a Comment Cancel reply

Which of the following tool categories accounts for most hand injuries?

According to OSHA, who is ultimately responsible for the safe condition of tools and equipment?

Which of the following would be a suitable diameter for single-handle tools requiring a power grip?

What is often the cause of tool damage and personal injury?

Which of the following is the preferred power tool control device?

Which of the following statements is TRUE regarding double-insulated tools?

Pressure from a hard surface, point, or edge on any part of the body is:

Machine guards on power tools help protect the employee from each of the following hazards, EXCEPT _____.

Which of the following is NOT a safe rule when working with tools?

For double-handle tools used for precision tasks, select a tool with a grip span that is _____ when fully closed and _____ when fully open.

When are tools with straight handles better to use than those with bent handles?

Each of the following is a condition that might result in hand and wrist illness, EXCEPT _____.

Each of the following is a safe practice when operating power tools, EXCEPT _____.

Most often, the damage to power extension cords is only to the _____.

A common violation OSHA compliance officers cite on construction worksites is _____.

About Waqar Ali

Leave a Comment Cancel reply

For double-handle tools used for precision tasks, select a tool with a grip span that is _ when fully closed and _ when fully open.