What is DART rate?
DART stands for Days Away, Restricted, or Transferred. It is an OSHA incidence rate that counts how many recordable injuries and illnesses resulted in time off work, restricted duty, or a job transfer — expressed per 100 full-time workers (a 200,000-hour base).
Unlike total recordable rates (TRIFR / TRIR), DART ignores medical-treatment-only cases. It sits between LTIFR (lost time only) and full recordable rates: every days-away case is a DART case, but restricted/transfer cases also count even when no days were lost.
This free DART rate calculator runs the official OSHA formula in your browser and shows a per-million-hour equivalent for comparison with international KPIs.
DART Rate Calculator
DART · Days Away, Restricted, or Transferred
OSHA incidence rate per 100 full-time workers (200,000-hour base). Count cases from OSHA Form 300 columns H + I — a subset of all recordables. Same period for both inputs.
Formula: DART Rate = (DART Cases × 200,000) ÷ Total Hours Worked
- DART cases = OSHA Form 300 column H (days away) + column I (restricted / transfer).
- Hours should be hours actually worked — not paid leave, holidays, or vacation.
- DART ≤ TRIR always; medical-treatment-only cases raise TRIR but not DART.
How to calculate DART rate
OSHA’s formula (same structure as other incidence rates on Form 300A) is:
DART Rate = (DART Cases × 200,000) ÷ Total Hours Worked
The 200,000 base represents 100 employees working 40 hours per week for 50 weeks.
| Input | What to enter |
|---|---|
| DART Cases | Number of recordable cases with days away from work and/or restricted work / job transfer — OSHA Form 300 column H + column I (case counts, not days). |
| Total Hours Worked | Hours actually worked by employees in scope, including overtime. Exclude paid non-work time (vacation, sick leave, holidays). |
Worked example
A plant records 5 DART cases and 800,000 hours worked in a year:
DART = (5 × 200,000) ÷ 800,000 = 1.25
The same inputs on a million-hour base equal 6.25 (DART × 5). Always state which base you are using when you report.
What counts as a DART case
Classification drives most comparison errors. Use your OSHA 300 log consistently.
- Count: cases with days away from work (column H) and/or job restriction or transfer (column I).
- Do not count here: other recordables that involved only medical treatment beyond first aid with no days away, restriction, or transfer (those raise TRIR, not DART).
- Count cases, not days: one injury that caused 10 days away is still one DART case for the rate, while a lost workday rate calculator counts all 10 days.
DART vs TRIR, TRIFR, and LTIFR
TRIR (total recordable incident rate) uses the same 200,000-hour base but counts all recordables. For the same period, DART ≤ TRIR.
TRIFR commonly uses a 1,000,000-hour base internationally. To compare: per-million = OSHA rate × 5.
LTIFR focuses on lost-time injuries only. Restricted/transfer cases can raise DART without raising LTIFR. An online accident frequency rate calculator gives the same million-hour view for the broader accident count, including first-aid cases where your procedure counts them.
Browse every free tool on the safety calculators hub.
How to interpret your DART result
There is no universal “good” DART. BLS publishes industry averages by NAICS — use those peers and your own trend.
- Strong industrial programmes: often well below 0.5–1.0.
- Private industry (indicative BLS-class ranges): commonly around 1–2.
- Construction and higher-hazard trades: typically wider and often higher.
A falling DART from aggressive early return-to-work can be genuine progress — or it can mask severity if injuries are unchanged. Read DART with TRIR, days-lost severity, and leading indicators.
Tips for accurate DART reporting
- Pull case counts from the OSHA 300 / 300A, not from informal incident lists.
- Use hours actually worked; do not pad the denominator with leave hours.
- Keep contractor and temporary-worker scope consistent with your recording rules.
- Reconcile DART with TRIR so medical-treatment-only cases are not double-counted or omitted wrongly.
- Investigate clusters of restricted-work cases — they often flag control gaps before days-away spikes.
Frequently asked questions
How do I calculate DART rate?
Multiply the number of DART cases by 200,000, then divide by total hours worked in the same period. Example: 5 cases and 800,000 hours → (5 × 200,000) ÷ 800,000 = 1.25.
What is the difference between DART and TRIR?
Both use OSHA’s 200,000-hour base. TRIR counts all recordable injuries and illnesses. DART counts only those that involved days away, restricted work, or job transfer. DART is always equal to or lower than TRIR for the same period.
Which OSHA 300 columns make up DART cases?
Column H (cases with days away from work) plus column I (cases with job transfer or restriction). Use the number of cases, not the number of days.
What is a good DART rate?
It depends on industry hazard profile. Many private-industry averages sit roughly around 1–2 per 100 full-time workers; world-class sites often sit below 0.5–1.0. Compare BLS data for your NAICS code and track your own trend.
Should vacation and sick leave hours be included?
No. OSHA incidence rates use hours actually worked. Exclude paid non-work time such as vacation, sick leave, and holidays, even if those hours were paid.
